REVISED - 4-15-26
New Mobile App
Enhancements
- NA
Bugs/Issues
- When a driver is at a Pickup or Drop Off and takes a photo, if the driver rotates the orientation of the device, a grey screen appeared. This issue has been fixed.
- When a load is created and dispatch defines load creation fields, when a driver is on Pickup screen or Drop Off screen the load creation information will prepopulate the form. If a driver edits those fields and a “Loads have Changed” message appears or driver goes to Load screen and resumes the load, the fields were being changed back to the Load Creation info. This has now been changed where if the driver makes a change this change will hold if a “Loads have Changed” message appears or the drivers goes to the Loads and resumes the load.
- If a driver input 0ft 0in and 0 1/4in for bottom gauge, the driver would receive a validation error. This issue has been fixed so driver can input a bottom gauge of 0.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article